There are various techniques and ways of constructing a retaining wall with piles. It all actually depends on the retaining wall kind. The common example below is on of a cemented retaining wall constructed for a warehouse. The basic design is inspired by cantilever concepts. This simple idea can then be transformed into a highly sophisticated design that can be used to cover huge concrete warehouses or even entire skyscrapers.
If you are interested in learning how to build a retaining wall, then you must first learn about the required material. For the construction of a concrete retaining wall, you will need landscaping block adhesive and small steel mesh (screw). You will also need large rounded rocks and small logs that are rectangular in shape, cut into one inch pieces. A key factor to note is that the landscape block adhesive should be used with small steel mesh pieces since these are considered as being quite a large size in comparison to the small rocks and logs.
Once you have the required materials, you will then need to prepare the area. This area should preferably be flat; it should not have any slopes or inclined areas. The most suitable place for landscape retaining wall construction is usually close to the road or the main house. Once you have identified the ideal place, then you should start the construction. Make sure that the landscape bricks or logs are placed securely on top of landscape block adhesive. Also make sure that the landscape bricks or logs are securely attached to the landscape retaining walls.
The next important aspect in learning how to build a retaining wall is to identify the basic concept. Basically, the concept behind retaining wall construction is to cover the wall with landscape bricks or log pieces so that they will retain their shape while retaining soil erosion. Before starting the construction, it is important that you have all the right tools and material ready. At this point, it is advisable to contact a professional landscape contractor who can assist you with your project. One important tool that you need to acquire before beginning the construction is a cantilever.
The use of a cantilever is very important because this device will enable you to keep the backfill level even while constructing the wall. This is because a cantilever is used to keep soil from building up under the wall by providing a surface for retaining wall construction. You will need to have backfill prepared prior to constructing the wall so that you do not need to clean stone and dirt and replace them after the wall is built.
As previously stated, you need to have a plan prior to doing the construction. When learning how to build a retaining wall, identifying the location and using the basic concepts of landscape design, a structural engineer plays an important role. A structural engineer will help you map out the positioning of existing walls, locate any drainage needs and determine the amount of soil erosion that may occur. If the landscape is designed properly then you will be able to construct retaining walls that will last for decades. In order for you to learn how to build a retaining wall that will last for decades, you will need to obtain the services of a qualified structural engineer.